WM1 - Baseboard Wire Cable Manager
Description
Designed by: Doug Mockett.
This versatile, two-part system consists of a base and cap. Versatile because the WM1 can be easily installed three ways: Horizontally along a baseboard; vertically up the side of a desk, work surface or wall; or to the underside of a desk or work surface. Simply screw, staple, or double-sided tape the base half in place, open, place the wires inside and snap or slide on the cap. Easy as that! Serrated finish on cap discourages scratches and fingerprints. Sold in one foot lengths up to 6 feet. Custom lengths available.
This versatile, two-part system consists of a base and cap. Versatile because the WM1 can be easily installed three ways: Horizontally along a baseboard; vertically up the side of a desk, work surface or wall; or to the underside of a desk or work surface. Simply screw, staple, or double-sided tape the base half in place, open, place the wires inside and snap or slide on the cap. Easy as that! Serrated finish on cap discourages scratches and fingerprints. Sold in one foot lengths up to 6 feet. Custom lengths available.
Size: 2 5/16" high by 15/16" wide; 1 to 6 ft long.
Contact us to order custom colors with minimum quantity required or any custom cut length up to 12 ft. Maximum length for ground freight is 8 ft. Longer lengths require special freight.
Optional double-sided tape factory installed or sold by the roll (216').
Contact us to order custom colors with minimum quantity required or any custom cut length up to 12 ft. Maximum length for ground freight is 8 ft. Longer lengths require special freight.
Optional double-sided tape factory installed or sold by the roll (216').
![]() | Made in USA |
Notes
Note:
• $20.00 cartoning charge for lengths 4'-7'
• 25 per box maximum
• $20.00 cartoning charge for lengths 4'-7'
• 25 per box maximum