FSA1/2H - Two Horizontal Flat Screen Monitor Arms - LIMITED TO STOCK ON HAND
Description
This part has been discontinued and is limited to stock on hand. They are non-returnable and non-refundable.
FSA1/2H features two arms adjustable to the weight of the monitors, from light (8 lbs.) to heavy monitors (up to 23 lbs.). Arms offer 14" of horizontal adjustment. Screens can tilt up or down 20 degrees and the screen mounts and arms can rotate up to 360 degrees. Fully extended, monitors can project 22" maximum from the mounting post. The system includes wire management to help conceal the wiring. Arms attach to plates on back of most flat screen monitors, which must have the VESA 75 mm or 100 mm mounting pattern. Installing is easy; just drill a single 7/16" hole in desk or work surface, fasten from underneath.
FSA1/2H features two arms adjustable to the weight of the monitors, from light (8 lbs.) to heavy monitors (up to 23 lbs.). Arms offer 14" of horizontal adjustment. Screens can tilt up or down 20 degrees and the screen mounts and arms can rotate up to 360 degrees. Fully extended, monitors can project 22" maximum from the mounting post. The system includes wire management to help conceal the wiring. Arms attach to plates on back of most flat screen monitors, which must have the VESA 75 mm or 100 mm mounting pattern. Installing is easy; just drill a single 7/16" hole in desk or work surface, fasten from underneath.
Installing is easy; just drill a single 15/32" (12mm) hole in desk or work surface, fasten from underneath.
Accommodates monitors from 8 lbs. to 23 lbs.
Maximum monitor size: 24"
Finish: Die cast aluminum in Metallic Silver
Accommodates monitors from 8 lbs. to 23 lbs.
Maximum monitor size: 24"
Finish: Die cast aluminum in Metallic Silver
 | Made in USA |
Surcharges
1 per box maximum.
Oversize Package Charge: $10 per box.