Standard configuration is three electrical outlets rated 15A/125VAC and two Category 6 data modules with 9 ft patch cords. Additional inserts available here.
Overall: 4-1/16" diameter
Cut Out: 3-5/32" diameter
9 ft. electrical cord
Recommended table thickness: 1/2" minimum to 1-3/4" maximum
Custom Cord Lengths and optional International Receptacles available. For more information, including pricing, please contact us.
Available with pre-installed Black trim ring, Satin Aluminum trim ring or with standard Clear rubber ring. Optional removable trim ring accessory
available in Black or Satin Aluminum (for units without pre-installed trim rings only).
This part has been discontinued and is limited to stock on hand. They are non-returnable and non-refundable.
Designed as a relocatable power tap for retrofit only.
For use in kitchen it must be plugged in to a GFCI outlet.
|UL listed and tested to meet UL1363 (Relocatable Power Tap). UL File No. E211536. Electrical codes vary by location. Please check with your electrician to verify that this unit meets your local code before installing.|