Standard configuration is three
Tamper Resistant electrical outlets rated 15A/125VAC and two Category 6 data modules with 9 ft patch cords.
Also see
PCS34/TR with standard Three electrical outlets and
PCS34A/TR with standard two electrical outlet and two data configuration.
Overall: 4 1/16" diameter
Cut Out: 3 5/32" diameter
9 ft. electrical cord.
Recommended table thickness: 1/2" minimum to 2" maximum.
The unit is held snugly and firmly in its hole by a tightly locking flange that secures from underneath. It also has a reset button that lights when power is "on".
Available with pre-installed Black or Satin Aluminum trim ring or with standard Clear rubber ring.
Optional removable trim ring accessory available in Black or Satin Aluminum (for units without pre-installed trim rings only).
Custom Cord Lengths and optional International Receptacles available. For more information, including pricing, please
contact us.
Designed as a relocatable power tap for retrofit only.
For use in kitchen it must be plugged in to a GFCI outlet.
This part has been discontinued and is limited to stock on hand. They are non-returnable and non-refundable.
 | UL File No. E326685 Vol. 4 (Furniture Power Distribution Units). Electrical codes vary by location. Please check with your electrician to verify that this unit meets your local code before installing. |