Pull up to access power and USB when you need it, press down into the surface when you don’t. Pull up on the cap and fully extend until unit clicks and locks in place. Press the release switch and press down to hide away. Easy to install, drop into a 2 3/8” dia hole and tighten the locking ring underneath. Then just plug and play.
• Pull up to access power, press down to close
• 3 Power outlets rated 15A/125VAC
• USB-A & USB-C charger, rate 3.1A 15.5W (total)
• ETL Listed
Outlet orientation is rotated so three prong plugs with a ground pin can be plugged in upside down. This helps open up space for large plugs and adapters that might otherwise have trouble plugging in with interference from the table top. Cap has a nickel finish with white trim and the sides are finished in satin nickel, which paired with the white face have a stylish contemporary look.
Stands 7 7/16” high above the surface
Overall height: 10 11/16”
5’ power cord.
Finish: White with Nickel accents