PCS110-90 - Pop Top - Pull Up Power Tower 3 Power/USBA+C

Installation Notes and Technical Drawing
Press the top to pop up the cap, then grab the cap and pull up. The unit locks in place when fully extended and allows access to 3 power outlets and 2 USB chargers. Its slender figure keeps a low profile and settles nicely into any design. When finished, press the release switch at the bottom and press the unit down back into the surface. Press down on the spring-loaded cap to then sit flush with the flange.

• Pull up to access power, press down to close
• 3 Power outlets rated 15A/125VAC
• USB-A & USB-C charger, rate 3.1A 15.5W (total)
• ETL Listed
Outlet orientation is rotated so three prong plugs with a ground pin can be plugged in upside down. This helps open up space for large plugs and adapters that might otherwise have trouble plugging in with interference from the table top. Cap and trim ring have a shimmery nickel finish and the sides are finished in satin nickel, which when paired with the black has a very subdued and stylish look.

To install, drill a 2 3/8” hole, drop in from the top and tighten the locking ring underneath.

Stands 9 1/16” high above the surface
Overall height: 12 3/8”

5’ power cord.

Finish: White with Nickel accents

U.L. Listed and Canadian U.L. ListedETL listed and tested to meet UL962A (Furniture Power Distribution). Electrical codes vary by location. Please check with your electrician to verify that this unit meets your local code before installing.
Read More Description
Print Product
Quantity Price
1 - 49 $97.45
50 - 99 $95.05
100 - 499 $92.65
500 - 999 $90.30
1000 + $88.05