Standard configuration is three Tamper Resistant
electrical outlets rated 15A/125VAC.
Also see PCS34A/TR
with standard two electrical outlet and two data configuration and PCS34B/TR
with standard three electrical outlet and two data configuration.
Overall: 4 1/16" diameter
Cut Out: 3 5/32" diameter
9 ft. electrical cord.
Recommended table thickness: 1/2" minimum to 2" maximum.
3 5/32" drill bit available here
The unit is held snugly and firmly in its hole by a tightly locking flange that secures from underneath. It also has a reset button that lights when power is "on".
Available with pre-installed Black or Satin Aluminum trim ring or with standard Clear rubber ring. Optional removable trim ring accessory
available in Black or Satin Aluminum (for units without pre-installed trim rings only).
Custom Cord Lengths and optional International Receptacles available. For more information, including pricing, please contact us.
Designed as a relocatable power tap for retrofit only.
For use in kitchen it must be plugged in to a GFCI outlet.
|UL File No. E326685 Vol. 4 (Furniture Power Distribution Units). Electrical codes vary by location. Please check with your electrician to verify that this unit meets your local code before installing.|