Size: 3” diameter, 11/16” deep. Cord slot size: 13/16” x 1”.
Trim Ring and Liner Color: Matte Black.
(Shown installed with laminate material)
How to make the LG3 work:
Glue laminate onto cap, then put cap onto trim ring.
Trim off excess laminate with router, using trim ring as guide. Remove trim ring.
Drill 3" hole and glue in liner to depth that puts laminate cap flush with desktop.
See Technical Drawing below to see component detail.
This part has been discontinued and is limited to stock on hand. They are non-returnable and non-refundable.
|Made in USA|