You're currently on:


Leveler Options & Variations

Standard Leveler 

A nylon glide that screws into the base of the leg. It permits about 1" to 1 1/4" vertical adjustment. One of its great benefits is it is concealed and invisible from most viewing levels. Included at no charge. 

 Standard Leveler

 Plate Leveler

Plate Leveler 

A big seller since we introduced in 1987. The Plate Leveler is a 1/2" thick solid steel disc with a 1/2" - 13 thread stem welded to it, permitting about 1" of vertical movement. It is the same diameter as the table leg and finished the same, so when the Plate Leveler is screwed all the way in or just slightly adjusted as in the photo here, the viewer’s eyes tends to see leg and leveler as one; psychologically, one merges both. Try it. The Plate Leveler adds an elegant touch to any table leg.

Casters 

Casters add a different finishing touch to legs, now that such a variety of industrial and design casters are available.
See our complete line of casters.
Note casters shown are available through custom orders only and are not sold separately. For information about using these or any other casters with our table leg series, please call 310-318-2491 for details or email custom@mockett.com.

 Casters

 Ingram/Larimore Sabots

 

Ingram/Larimore Sabots A whole new dimension to finishing a leg. Now, one can continue a line used elsewhere in the table or in the room design. Or, one can make a statement to emphasize the leg or draw a viewer’s eye lower in the overall perspective. Sabots come in two heights and shapes shown here, unfinished. Delivery time is six weeks. Available in a variety of woods. Note: No vertical adjustment.  

Designed by: Robert Ingram, Jack Larimore - Philadelphia, PA.

 Sabot Shape

 DONUT

3", 4", 6"

1 1/4" & 2 1/4" 

5 1/4", 6 1/2", 8 1/2" 

 CONE

3", 4", 6" 

1 1/4" & 2 1/4" 

5 1/4", 6 1/2", 8 1/2" 

 BELL

3", 4", 6"

1 1/4" & 2 1/4" 

5 1/4", 6 1/2", 8 1/2" 


Red Head bolts leg to floor
Ever wondered how those stand alone tables supported by one central leg stayed firmly in place? With a red head bolt, that’s how. A neat idea. Just drill a hole in concrete floor, screw Red Head in place, and, using long bolt supplied, screw leg into Red Head, then screw table top onto leg. Voila! Leg is firmly fastened to floor. Top is firmly fastened to leg. That’s it. Variations available for wood and other types of floors. We can do this for any leg at reasonable extra cost. Allow lead time of about 6-8 weeks.
 
Glass cap for glass table
Glass tables look great. Our "Great Lookin Legs"™ can help them look even greater with Glass caps on the tops of the legs. Here’s how they work:
• We weld a flat cap to the top of the leg with a threaded hole in the center. We weld a threaded bolt to a 1/2" thick cap.
• All are finished as you specify.
• You drill a hole in glass and assemble.
• Finished table with Glass Caps atop our legs look terrific. Not too expensive to do either, allow lead time of about 6-8 weeks.
Leveler Options & Variations