The first ever Power and Communications Grommet specifically designed for kitchens, laboratories, medical offices; any place liquids could spill. Note the clear rubber ring around the top. This ring forms a seal when the unit is closed, preventing water and other liquids from getting into PCS34A. A simple yet very, very effective improvement in Power and Data Grommets! To use, just grab the two metal handles on the top and pull up until PCS34A "clicks" locked in place. To lower, depress the red button on bottom and push down.

Standard configuration is two electrical outlets rated 15A/125VAC and two Category 5e data modules; other power and data options available.
Also see PCS34-90 with standard three electrical outlet configuration.

Overall: 4 1/16" diameter
Cut Out: 3 5/32" diameter
9 ft. electrical cord.
Data modules are unwired.

Recommended table thickness: 1/8" minimum to 2" maximum.

The unit is held snugly and firmly in its hole by a tightly locking flange that secures from underneath. It also has a reset button that lights when power is "on".

Designed as a relocatable power tap for retrofit only. Does not currently meet NEC Article 406.11. For kitchen use requires GFI.

UL File No. E211536. Electrical codes vary by location. Please check with your electrician to verify that this unit meets your local code before installing.